Ld-systems MAUI 44 User Manual download pdf (Page 13)

Important notes about using the MAUI44SE subwoofer extension:

If PA subwoofer MAUI44SE subwoofer is to be used as stand-alone, set the DSP MODE switch to the left position

MANUAL. The connectors LINE INPUT LEFT / RIGHT, and LINE OUTPUT LEFT / RIGHT can now be used to connect

playback devices and to control other speakers or ampliﬁers. Also, the SUB LEVEL, SUB FREQ and SUB PHASE

controls can be used for customised settings.

If the MAUI44SE subwoofer is used as an extension for the MAUI44 column system, set the DSP MODE switch

to the right position SLAVE (MAUI44) and connect the line output SLAVE SUB OUT (MAUI44SE) of the MAUI44

column system with the line input SLAVE SUB IN (MAUI44) of the MAUI44SE subwoofer. If the switch is in SLAVE

position (MAUI44), the SUB LEVEL, SUB FREQ and SUB PHASE controls , as well as the left line input LINE INPUT

LEFT are disabled.

LINE INPUT LEFT / RIGHT

Unbalanced line input with 2 RCA phono jacks. An incoming stereo signal is mono summed internally. If

the MAUI44SE subwoofer is to be used as stand-alone PA subwoofer, set the DSP MODE switch to the left

position MANUAL.

LINE INPUT LEFT / RIGHT

Balanced line input with 2 female XLR / 6.3 mm jack (combo jack). An incoming stereo signal is mono summed

internally. If the MAUI44SE subwoofer is to be used as stand-alone PA subwoofer, set the DSP MODE switch to

the left position MANUAL.

SLAVE SUB IN (MAUI44)

Balanced line input with XLR / 6.3 mm jack (combo jack). If the MAUI44SE subwoofer is used as an extension

for the MAUI44 column system, optimal control is achieved by the MAUI44 column system in accordance

with the following steps: Move the DSP MODE switch to the right position SLAVE (MAUI44) and connect

the line output SLAVE SUB OUT (MAUI44SE) of the MAUI44 column system with the line input SLAVE SUB

IN (MAUI44) of the MAUI44SE subwoofer using a balanced XLR Cable. If the DSP MODE switch is in SLAVE

position (MAUI44), the SUB LEVEL, SUB FREQ and SUB PHASE controls , as well as the left line input LINE

INPUT LEFT are disabled. Now, the control of the volume on the subwoofer of the MAUI44 column system and

the MAUI44SE subwoofer is done via the SUB LEVEL controller on the MAUI44 column system.

LINE OUTPUT LEFT / RIGHT

Balanced line output with 2 male XLR connectors. The output signal corresponds to the input signal.

SUB LEVEL

Volume controller for the MAUI44SE subwoofer. If the DSP MODE switch is in position SLAVE (MAUI44), the

volume control SUB LEVEL is disabled.

SUB FREQ

Setting the upper cut-off frequency of the subwoofer from 80 Hz to 140 Hz. If the DSP MODE switch is in

position SLAVE (MAUI44), this feature is disabled.

CONNECTIONS, CONTROLS, AND INDICATORS:

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 147 148

No comments

Ld-systems MAUI 44 User Manual Page 13